- Smart X024
- Smart X112
- Smart X224
- Smart X348
- Smart X472
- Smart X5120
- Smart X7120
- Smart X10120
- Smart X15240
- Smart X20240
| Technical Specifications | ||
| MODEL NO | Smart X024 | |
| Image |  |
|
| Description | 0.5 KW | |
| Maximum Loading Capacity | 500 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | Mosfet | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | Relay | |
| Maximum change over time | <10 u sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 12-24V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 1-2 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X112 | |
| Image | |
|
| Description | 1 KW | |
| Maximum Loading Capacity | 1000 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | Mosfet | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | Relay | |
| Maximum change over time | <10 u sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 12-24V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 1-2 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X224 | |
| Image | |
|
| Description | 2 KW | |
| Maximum Loading Capacity | 2000 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | Mosfet | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | Relay | |
| Maximum change over time | <10 u sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 24-48V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 1-2 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X348 | |
| Image | |
|
| Description | 3 KW | |
| Maximum Loading Capacity | 3000 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | Mos/IGBT | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | Relay | |
| Maximum change over time | <10 u sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 36-72V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 1-2 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X472 | |
| Image | |
|
| Description | 4 KW | |
| Maximum Loading Capacity | 4000 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | Mos/IGBT | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | Relay | |
| Maximum change over time | <10 u sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 48-72V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 2-3 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X5120 | |
| Image | |
|
| Description | 5 KW | |
| Maximum Loading Capacity | 5000 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | IGBT | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | static | |
| Maximum change over time | 0 sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 72-120V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 2-3 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X7120 | |
| Image | |
|
| Description | 7.5 KW | |
| Maximum Loading Capacity | 7500 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | IGBT | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | static | |
| Maximum change over time | 0 sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 96-240V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 2-3 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X10120 | |
| Image | |
|
| Description | 10 KW | |
| Maximum Loading Capacity | 10000 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | IGBT | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | static | |
| Maximum change over time | 0 sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 120-360V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 3-4 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X15240 | |
| Image | |
|
| Description | 15 KW | |
| Maximum Loading Capacity | 15000 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | IGBT | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | static | |
| Maximum change over time | 0 sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 120-480V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 3-4 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
| Technical Specifications | ||
| MODEL NO | Smart X20240 | |
| Image | |
|
| Description | 20 KW | |
| Maximum Loading Capacity | 20000 w | |
| Inverter Efficiency | >90 % | |
| Powering Device | IGBT | |
| Output Voltage | 220±3V | |
| Voltage regulation at full load | >98 % | |
| Output Frequency | 50±1 Hz | |
| Output wave form | Sine wave | |
| Power factor | ≥ 0.8 | |
| Swithching frequency | 20 KHz | |
| Input voltage (inverter mode) AC | 100-290 | |
| Input voltage (UPS mode) AC | 180-265 | |
| Change over type | static | |
| Maximum change over time | 0 sec | |
| Input method (P&N) | 2 Wires | |
| Charging voltage Iv | 100-290 | |
| Charging current Ic (per battery)@ 220 V AC | 10-15 A | |
| Battery voltage range | 240-480V | |
| Charging method constant current SMPS | STEPPED | |
| No load current | 3-4 A | |
| Enclosure type | IP 55 | |
| Display - 2/4 line LCD | Battery volt, Input volt, Output volt, Load, Temperature, Charging mode, Charging current, Battery status, Inverter/UPS status | |
| Protections | Over load, Short circuit, Reverse polarity, Lightning, Shunt loads with high crust factor | |
Contact Us
Chennai (Regd Office) :
Flat No.24, Paramount Apartment, 39C, North Parade Road, St.Thomas Mount, Chennai-600016.
18008890045
+91 94447 89013
sahayalouis@deltastarsustainableproducts.com
enquiry@dsnetzero.com
Dindigul (Factory) :
SF no 416/11 Soosai Patty - MDR 904
Coimbatore :
H6, TNHB Colony, Rajiv Gandhi Nagar, Sowripalayam PO, Coimbatore-28.
Oman :
Delta solar Company LLC,
PO 2571, PC 130 Al Aziba, Oman.
© Copyright 2024 Delta Star Solar Energy Pvt Ltd.
Website by OCS